Rubber-base coatings are one of the most popular types of coatings used for
refinishing swimming pools, due largely to the fact that most swimming pools
were originally coated with chlorinated rubber prior to the development of
epoxy coatings. Today, rubber-base pool coatings still provide an attractive, easy to apply finish.

Paralon 2 - Chlorinated Rubber

Soft Satin Finish Easy to Apply Extended Durability Usage Restriction

PARALON 2 is our premium grade chlorinated rubber pool enamel. This coating is recommended for refinishing existing chlorinated rubber coatings. It is an attractive, low sheen, rubber-base pool enamel with high water resistance. The soft satin appearance will please the most discriminating pool owner while providing economical protection for the pool surface. Two coats of PARALON 2 are required for best results. On unusually porous, bare surfaces like concrete or plaster, a third coat may be necessary.

Coverage: 250 - 275 square feet average per gallon.
Available in these attractive colors:
White, Blue Ice, Blue Mist, Bikini Blue and Black.

Optilon - Synthetic Rubber

Strong Surface Excellent Protection Resists Chemicals Usage Restriction

OPTILON is a quality synthetic rubber-base formula meeting all of the high performance expectations of chlorinated rubber. OPTILON can be applied to bare concrete or plaster as well as over old rubber base coatings. OPTILON also has excellent chemical resistance and color retention while yielding 2-3 years average service. Two coats of OPTILON are required for best results. On bare surfaces that are unusually porous, a third coat may be necessary.

Coverage: 250 - 275 square feet average per gallon.
Available in these attractive colors:
White, Blue Ice, Blue Mist, Bikini Blue and Black.

SR Opticoat - Low VOC Synthetic Rubber

Quality Finish Excellent Protection Resists Chemicals

SR OPTICOAT is same quality, synthetic rubber-base enamel as
OPTILON. For use in states or jurisdictions that restrict PARALON 2 or OPTILON.

PLEASE NOTE: Synthetic rubber-base finishes may be applied to chlorinated
rubber and synthetic rubber. Chlorinated rubber may only be applied over chlorinated rubber.