Special care must be taken to insure the success of coating
metal pool
surfaces. Aluminum, steel and galvanized steel all have their
special
properties which require the selection of the appropriate primer.
Bare metal
should receive two coats of primer to eliminate pinholes and
corrosion. Do
not use the primer over an existing coating.
Bonderite
BONDERITE primer is specifically formulated for use over
bare aluminum pool surfaces. This material is a two-part epoxy
that should be applied by roller or spray over sanded aluminum.
Two coats are recommended for maximum protection. BONDERITE
should be used as an undercoat for POXOLON and ZERON.
Coverage: 200 - 250 square feet per gallon.
Steel Primers
No. 219 STEEL PRIMER is for bare steel pool surfaces. Bare
steel must be sandblasted, degreased and primed immediately.
No. 220 GALVANIZED STEEL PRIMER is a special formula primer
for galvanized steel surfaces. See label instructions for
application. See the technical bulletin section on page 1
to receive more information.
Coverage: 200 - 250 square feet per gallon.
|
