Home
Epoxy Coatings
Epoxy pool coatings have proven to be the most effective long-range protection for swimming pool surfaces. This is due to the fact that epoxies cure to a very hard, non-porous finish that is insensitive to pool chemicals, ph balance and automatic pool cleaning machines. Their "ceramic-like" qualities create a fresh and inviting appearance that will be easy to clean and extremely durable. We produce two types of epoxy pool coatings. The following product descriptions will enable you to decide which system is right for you.

The Zeron System

The ZERON system is the longest lasting epoxy pool coating available. You can expect up to eight years of service from one application of this product.

The greatest advantage of the ZERON system is that it only requires one coat. ZERON is a heavier bodied material than POXOLON 2 so it will require a little more effort in its application and will not spread as far. However, due to the extremely long life of ZERON, the cost per year of service is lower than any other pool coating available.

This coating may be applied by roller or airless spray equipment. ZERON is highly recommended for professional pool builders and pool service companies as an alternative to traditional pool plaster. The finished surface will stay brighter and will be easier to keep clean than a plastered pool.

Coverage: Approximately 125 - 150 square feet per gallon. Available in these attractive colors: White, Blue Ice, Bikini Blue and Blue Mist.

 
  • High Gloss Finish
  • Alternative to Plaster
  • Longest Lasting
  • One Coat is all you need

The Poxolon 2 System

POXOLON 2 is a high gloss epoxy pool coating that is easy to apply and should yield up to five years of service. This finish is very easy to clean as is the case with all epoxy pool coatings. You may use POXOLON 2 on most conventional pool surfaces with excellent results.

Uncoated pool surfaces will require a prime coat to insure good adhesion. Recommended for use by pool service companies and the do it yourself pool owner. Use with primer on concrete, plaster, fiberglass and metal pools.

Two finish coats of POXOLON 2 are required in all cases. POXOLON 2 may be applied by either airless sprayer or roller.

Coverage: Approximately 225 - 250 square feet per gallon. Available in these attractive colors: White, Blue Ice, Blue Mist, Bikini Blue, Viking Blue, Spanish Blue, Sunshine Yellow, Red Pepper, Black, and Clear.

 
  • Tile-Like Finish
  • Low Maintenance
  • Years of Life
  • Two Coats required

©2014 Kelley Technical Coatings. All rights reserved.
1445 South 15th Street    P.O. Box 3726
Louisville, Kentucky 40201-3726
502.636.2561    800.458.2842   Fax 502.635.5170