Convoy II Super Convoy Super "X" Convoy
Base One component waterborne acrylic Two component epoxy Two component epoxy
Coverage 100-150 sq. ft.-gal. 125-150 sq. ft.-gal. 50-60 sq. ft.-gal.
Set To Touch 1 hour 4 hrs. 4 hrs. at 72ºF
Dry Time Before Traffic 4 hrs. at 72ºF Overnight if coole 2 days at 75º - 85º One day for light foot traffic 4 days at 60ºF - 85ºF 2 days at 75ºF - 85ºF One day for light foot traffic 4 days at 60ºF - 85ºF
Thinning and Cleanup Water #1109 #1108
Number of Coats One or two One One
Induction Time After Mixing None None 30 minutes
Pot Life After Mixing Indefinite 8 hrs. maximum Avg. 6 hrs. maximum depending on temperature
Recoating Time 4 hrs. (if necessary) 16 hrs. - if necessary Not necessary
Flash Point 200ºF 110ºF 120ºF
Viscosity Krebs-Stormer 90-100 K.U. 80 K.U. 110 to 120 K.U.
Packaging Quarts & Gal.
5 Gallons
Special Order
Quarts & Gal.
5 Gallons
Special Order
Quarts & Gal.
5 Gallons
Special Order
Can Stability Indefinite 2 years 2 years
Abrasion Resistance Very good Superb Superb
Slip Resistance Excellent Superb Superb
Availability #330 White
#331 Gray
#333 Yellow
#334 Green
#335 Tile Red
#336 Black
#338 Orange
#360 Tile Red
#363 Yellow
#368 White
#369 Black
#370 Dark Gray
#371 Light Gray
#372 Green
#810 Orange
#811 Gray
#813 Yellow
#818 Tile Red
#819 Black
#820 White
#822 Green
Primer #309 Metal Primer
(Metal & Aluminum)
#310 Wood Primer
#219 Epoxy Metal Primer (Metal)
#215 Bonderite Primer (Aluminum)
#219 Epoxy Metal Primer (Metal)
#215 Bonderite Primer (Aluminum)
V.O.C
(lbs.per gallon)
.44 2.8 1.89

 

Chemical Resistance for Super Convoy and Super "X" Convoy
Acetone SS Hydrogen Peroxide E
Ammonia G Jet Fuel E
Animal Fats E Linseed Oil E
Aromatic Fuel E Lube Oil E
Aviation Gas E Nitric Acid SS
Beer E Phenol E
Bleach E Phosphoric Acid E
Chlorinated Solvents SS Salt Water E
Chromic Acid E Skydrol SS
Corn Oil E Sodium Hydroxide E
Denatured Alcohol E Steam E
Detergents E Sulfuric Acid G
Ethylene Glycol E Tannic Acid G
Fruit Juice E Toluene E
Formaldehyde E Trisodium Phosphate Solvents E
Gasoline E Fresh Water E
Glycerine E Wine E
Hydrochloric Acid E Xylol E

Convoy II is recommended for areas where exposure to these substances is mild.

E - Excellent resistance to splash & spillage
G - Good resistance to splash & spillage
S - Softens but recovers
SS - Softens if allowed to stand
F - Complete failure

Regarding Guarantees

In order to promote sales of new, unproven paints, some manufacturers have offered "unconditional guarantees". A careful examination of these so-called guarantees will reveal the fact that the final decision regarding the extent of the guarantee is solely the decision of the paint manufacturer. In effect, it does not guarantee anything. Reliable manufacturers of safety coatings sell their products on the basis of reputation and past performance and do not use any fictitious guarantees to attract customers. Kelley Technical Coatings, Inc. has produced safety coatings since 1951. Each year, through a program of continuous and persistent testing and research, we have been able to upgrade these products. We are specialists in the production of safety coatings and we feel certain that no finer safety coatings were ever offered to the industry.

After we ship safety coatings, we have no further control over the application or any other conditions which could influence the results obtained.

We do supply very complete special bulletins on each product. If these recommendations are followed, the chance of failure is remote.

Let us emphasize that an experienced safety manufacturer, such as Kelley Technical Coatings, Inc. plus expertly formulated safety coatings using only the best raw materials, are your best insurance for trouble free finishes.

 







 
1445 South 15th Street P.O. Box 3726
Louisville, Kentucky 40201-3726
(502) 636-2561 (800) 458-2842 Fax (502) 635-5170